FOUNDRY-SN-ROUTER-TRAP-MIB DEFINITIONS ::= BEGIN

-- Router Trap MIB Release 1.0.0
-- Revision 01/24/03

-- Copyright 1996-1997 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry SNMP Management Information Base Specification
-- (Specification) embodies Foundry's confidential and
-- proprietary intellectual property. Foundry retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions


-- Imports


IMPORTS
   TRAP-TYPE              FROM RFC-1215
   foundry                FROM FOUNDRY-SN-ROOT-MIB
   snOspfRouterId,
   snOspfIfStatusIpAddress,
   snOspfIfStatusState,
   snOspfVirtIfStatusAreaID,
   snOspfVirtIfStatusNeighbor,
   snOspfVirtIfStatusState,
   snOspfNbrIpAddr,
   snOspfNbrRtrId,
   snOspfNbrState,
   snOspfVirtNbrArea,
   snOspfVirtNbrRtrId, 
   snOspfVirtNbrState, 
   snOspfPacketSrc,
   snOspfConfigErrorType,
   snOspfPacketType,
   snOspfLsdbAreaId,
   snOspfLsdbType,
   snOspfLsdbLsId,
   snOspfLsdbRouterId,
   snOspfExtLsdbLimit     FROM FOUNDRY-SN-OSPF-GROUP-MIB;

-- Textual Conventions

-- Groups

-- SECTION 2: MIB Objects


-- Trap Information

-- These definitions use the TRAP-TYPE macro as defined in RFC 1215.

-- Foundry Networks, Inc. Specific Traps

snTrapOspfIfStateChange TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfIfStatusIpAddress,
                snOspfIfStatusState   -- The new state
              }
   DESCRIPTION
      "An ospfIfStateChange trap signifies that there
      has been a change in the state of a non-virtual
      OSPF interface. This trap should  be  generated
      when  the interface state regresses (e.g., goes
      from Dr to Down) or progresses  to  a  terminal
      state  (i.e.,  Point-to-Point, DR Other, Dr, or
      Backup)."
        --#TYPE "Foundry Trap: OSPF Interface State Change"
        --#SUMMARY "OSPF router id %s, interface %s state changed to %d."
        --#ARGUMENTS { 0, 1, 2 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 3

snTrapOspfVirtIfStateChange TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtIfStatusAreaID,
                snOspfVirtIfStatusNeighbor,
                snOspfVirtIfStatusState  -- The new state
              }
   DESCRIPTION
      "An ospfIfStateChange trap signifies that there
      has  been a change in the state of an OSPF vir-
      tual interface.
      This trap should be generated when  the  inter-
      face  state  regresses  (e.g., goes from Point-
      to-Point to Down) or progresses to  a  terminal
      state (i.e., Point-to-Point)."
        --#TYPE "Foundry Trap: OSPF Virtual Interface State Change"
        --#SUMMARY "OSPF router id %s, virtual interface area id %s  neighbor %s state changed to %d."
        --#ARGUMENTS { 0, 1, 2, 3 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 4


snOspfNbrStateChange TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfNbrIpAddr,
                snOspfNbrRtrId,
                snOspfNbrState  -- The new state
              }
    DESCRIPTION
       "An  ospfNbrStateChange  trap  signifies   that
       there  has been a change in the state of a non-
       virtual OSPF neighbor.   This  trap  should  be
       generated  when  the  neighbor  state regresses
       (e.g., goes from Attempt or Full  to  1-Way  or
       Down)  or progresses to a terminal state (e.g.,
       2-Way or Full).  When an  neighbor  transitions
       from  or  to Full on non-broadcast multi-access
       and broadcast networks, the trap should be gen-
       erated  by the designated router.  A designated
       router transitioning to Down will be  noted  by
       ospfIfStateChange."
        --#TYPE "Foundry Trap: OSPF Neighbour State Change"
        --#SUMMARY "OSPF  router id %s neighbor area %s, neighbor router id  %s state changed to %d."
        --#ARGUMENTS { 0, 1, 2, 3 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 5


snOspfVirtNbrStateChange TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtNbrArea,
                snOspfVirtNbrRtrId,
                snOspfVirtNbrState  -- The new state
              }
    DESCRIPTION
       "An ospfIfStateChange trap signifies that there
       has  been a change in the state of an OSPF vir-
       tual neighbor.  This trap should  be  generated
       when  the  neighbor state regresses (e.g., goes
       from Attempt or  Full  to  1-Way  or  Down)  or
       progresses to a terminal state (e.g., Full)."
        --#TYPE "Foundry Trap: OSPF Virtual Neighbour State Change"
        --#SUMMARY "OSPF router id %s virtual neighbor area %s, virtual neighbor router id  %s state changed to %d."
        --#ARGUMENTS { 0, 1, 2, 3 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 6



snOspfIfConfigError TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfIfStatusIpAddress,
                snOspfPacketSrc,  -- The source IP address
                snOspfConfigErrorType, -- Type of error
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfIfConfigError  trap  signifies  that  a
       packet  has  been received on a non-virtual in-
       terface  from  a  router  whose   configuration
       parameters  conflict  with this router's confi-
       guration parameters.  Note that the  event  op-
       tionMismatch  should  cause  a  trap only if it
       prevents an adjacency from forming."
        --#TYPE "Foundry Trap: OSPF Interface Configuration Error"
        --#SUMMARY "configuration error type %d with  packet type %d has been received on interface %s, router id %s from  %s."
        --#ARGUMENTS { 3, 4, 1, 0, 2 }
        --#SEVERITY MAJOR
        --#STATE OPERATIONAL
   ::= 7


snOspfVirtIfConfigError TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtIfStatusAreaID,
                snOspfVirtIfStatusNeighbor,
                snOspfConfigErrorType, -- Type of error
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfConfigError trap signifies that a pack-
       et  has  been  received  on a virtual interface
       from a router  whose  configuration  parameters
       conflict   with   this  router's  configuration
       parameters.  Note that the event optionMismatch
       should  cause a trap only if it prevents an ad-
       jacency from forming."
        --#TYPE "Foundry Trap: OSPF Virtual Interface Configuration Error"
        --#SUMMARY "configuration error type %d with  packet type %d has been received on virtual interface area id %s, router id %s from neighbor %s."
        --#ARGUMENTS { 3, 4, 1, 0, 2 }
        --#SEVERITY MAJOR
        --#STATE OPERATIONAL
   ::= 8


snOspfIfAuthFailure TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfIfStatusIpAddress,
                snOspfPacketSrc,  -- The source IP address
                snOspfConfigErrorType, -- authTypeMismatch or
                                     -- authFailure
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfIfAuthFailure  trap  signifies  that  a
       packet  has  been received on a non-virtual in-
       terface from a router whose authentication  key
       or  authentication  type  conflicts  with  this
       router's authentication key  or  authentication
       type."
        --#TYPE "Foundry Trap: OSPF Interface Authentication Failure"
        --#SUMMARY "OSPF authentication failed. Router ID %s,Interface %s, packet src %s, error type %d and packet type %d."
        --#ARGUMENTS { 0, 1, 2, 3, 4 }
        --#SEVERITY MINOR
        --#STATE OPERATIONAL
   ::= 9


snOspfVirtIfAuthFailure TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtIfStatusAreaID,
                snOspfVirtIfStatusNeighbor,
                snOspfConfigErrorType, -- authTypeMismatch or
                                     -- authFailure
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfVirtIfAuthFailure trap signifies that a
       packet has been received on a virtual interface
       from a router whose authentication key  or  au-
       thentication  type conflicts with this router's
       authentication key or authentication type."
        --#TYPE "Foundry Trap: OSPF Virtual Interface Authentication Failure"
        --#SUMMARY "OSPF authentication failed. Router ID %s,virtual interface %s, Neigbor %s, Error type %d and packet type %d."
        --#ARGUMENTS { 0, 1, 2, 3, 4 }
        --#SEVERITY MINOR
        --#STATE OPERATIONAL
   ::= 10


snOspfIfRxBadPacket TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfIfStatusIpAddress,
                snOspfPacketSrc,  -- The source IP address
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfIfRxBadPacket trap  signifies  that  an
       OSPF  packet has been received on a non-virtual
       interface that cannot be parsed."
        --#TYPE "Foundry Trap: OSPF Interface Receive Bad Packet"
        --#SUMMARY "OSPF Router Id %s, interface %s  receive bad packet (type %d) from %s."
        --#ARGUMENTS { 0, 1, 3, 2 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 11


snOspfVirtIfRxBadPacket TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtIfStatusAreaID,
                snOspfVirtIfStatusNeighbor,
                snOspfPacketType
              }
    DESCRIPTION
       "An ospfRxBadPacket trap signifies that an OSPF
       packet has been received on a virtual interface
       that cannot be parsed."
        --#TYPE "Foundry Trap: OSPF Virt Interface Receive Bad Packet"
        --#SUMMARY "OSPF router id %s, virtual interface %s received bad packet (type %d) from neighbor %s."
        --#ARGUMENTS { 0, 1, 3, 2 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 12


snOspfTxRetransmit TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfIfStatusIpAddress,
                snOspfNbrRtrId, -- Destination
                snOspfPacketType,
                snOspfLsdbType,
                snOspfLsdbLsId,
                snOspfLsdbRouterId
              }
    DESCRIPTION
       "An ospfTxRetransmit  trap  signifies  than  an
       OSPF  packet  has  been retransmitted on a non-
       virtual interface.  All packets that may be re-
       transmitted  are associated with an LSDB entry.
       The LS type, LS ID, and Router ID are  used  to
       identify the LSDB entry."
        --#TYPE "Foundry Trap: OSPF Retransmit"
        --#SUMMARY "OSPF router id %s, interface %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor router id %s."
        --#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 13


ospfVirtIfTxRetransmit TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfVirtIfStatusAreaID,
                snOspfVirtIfStatusNeighbor,
                snOspfPacketType,
                snOspfLsdbType,
                snOspfLsdbLsId,
                snOspfLsdbRouterId
              }

    DESCRIPTION
       "An ospfTxRetransmit  trap  signifies  than  an
       OSPF packet has been retransmitted on a virtual
       interface.  All packets that may be retransmit-
       ted  are  associated with an LSDB entry. The LS
       type, LS ID, and Router ID are used to identify
       the LSDB entry."
        --#TYPE "Foundry Trap: OSPF Virt Interface Retransmit"
        --#SUMMARY "OSPF router id %s, virtual interface area id %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor %s."
        --#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 14


snOspfOriginateLsa TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                snOspfLsdbType,
                snOspfLsdbLsId,
                snOspfLsdbRouterId
              }
    DESCRIPTION
       "An ospfOriginateLsa trap signifies that a  new
       LSA  has  been originated by this router.  This
       trap should not be invoked for simple refreshes
       of  LSAs  (which happesn every 30 minutes), but
       instead will only be invoked  when  an  LSA  is
       (re)originated due to a topology change.  Addi-
       tionally, this trap does not include LSAs  that
       are  being  flushed  because  they have reached
       MaxAge."
        --#TYPE "Foundry Trap: OSPF Originate LSA"
        --#SUMMARY "New LSA (area id %s, type %d, LS Id %s and router id %s) has been originated by router id %s."
        --#ARGUMENTS { 1, 2, 3, 4, 0 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 15


snOspfMaxAgeLsa TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                snOspfLsdbType,
                snOspfLsdbLsId,
                snOspfLsdbRouterId
              }
    DESCRIPTION
       "An ospfMaxAgeLsa trap signifies  that  one  of
       the LSA in the router's link-state database has
       aged to MaxAge."
        --#TYPE "Foundry Trap: OSPF MaxAge LSA"
        --#SUMMARY "The LSA (area id %s, type %d, LS Id %s and router id %s) in router id %s link-state database has aged to maximum age."
        --#ARGUMENTS { 1, 2, 3, 4, 0 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 16



snOspfLsdbOverflow TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfExtLsdbLimit
              }
    DESCRIPTION
       "An ospfLsdbOverflow trap  signifies  that  the
       number of LSAs in the router's link-state data-
       base has exceeded ospfExtLsdbLimit."
        --#TYPE "Foundry Trap: OSPF LS DB Overflow"
        --#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded %d."
        --#ARGUMENTS { 0, 1 }
        --#SEVERITY WARNING
        --#STATE OPERATIONAL
   ::= 17


snOspfLsdbApproachingOverflow TRAP-TYPE
   ENTERPRISE foundry
   VARIABLES {
                snOspfRouterId, -- The originator of the trap
                snOspfExtLsdbLimit
              }
    DESCRIPTION
       "An ospfLsdbApproachingOverflow trap  signifies
       that  the  number of LSAs in the router's link-
       state database has exceeded ninety  percent  of
       ospfExtLsdbLimit."
        --#TYPE "Foundry Trap: OSPF LS DB Near Full"
        --#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded ninety percent of  %d."
        --#ARGUMENTS { 0, 1 }
        --#SEVERITY INFORMATIONAL
        --#STATE OPERATIONAL
   ::= 18

END